Planet Gigabit Ethernet 56V PoE-Adapter Single-Port 10/100/1000Mbps Ultra PoE Injector 60W 235g

Planet Gigabit Ethernet 56V PoE-Adapter Single-Port 10/100/1000Mbps Ultra PoE Injector 60W 235g

Produktbeschreibung:

Interface 2 x RJ45 interfaces  - 1-port 10/100/1000Mbps
Data + Power output  - 1-port 10/100/1000Mbps
Data input 1 x AC 100-240V input power socket
  Power over Ethernet Ultra Power over Ethernet
PSE Up to 60 watts of power on 4-pair UTP Backward
compatible with IEEE 802.3at/af PD device Auto-detection
of PoE IEEE 802.3at/af equipment and devices to
check whether there’s any damage done via  incorrect
installation Remote power feeding up to 100m  
Hardware All-in-one compact size design Internal
power supply LED indicators for Power LED and
Active LED (PoE ready/in-use)         PLANET POE-172
Ultra Power over Ethernet Injector provides a
maximum of 60-watt power and high-speed Ethernet
data connection anywhere in your network infrastructure.
PLANET single port Ultra Power over Ethernet solution
contains the following products:   POE-172: 60-watt
Ultra Power over Ethernet Injector POE-171S: 12V/19V/24V
DC Power over Ethernet Splitter   Quick and Easy
Gigabit Ultra Power PoE Network Deployment The
POE-172 is a Single-Port,
Ultra Power over Ethernet Injector with a maximum
of 60 watts of power output over Ethernet cables.
It is designed specifically to meet the demand
for growing higher power required network equipment
such as:   PTZ Speed Dome AIO (All-in-One) touch
PC Remote digital signage display Other network
devices that need higher power to work normally
  The POE-172 delivers the Ethernet digital data
with 56V DC power over the twisted pair cables
as a 60-watt Power over Ethernet Injector,
and the connected Ultra Power over Ethernet splitter,
the POE-171S, will separate the digital data and
the power into three optional outputs (12V/19V/24V
DC) with distance up to 100 meters.
  60 watts of Power over 4-pair UTP The POE-172
and POE-171S Ultra PoE solutions use the same
cabling standard such as IEEE 802.3at/af PoE.
Instead of delivering power over 2-pair twisted
UTP – be it end-span (Pins 1,
2, 3 and 6) or mid-span (Pins 4, 5, 7 and 8),
it provides the capability to source up to 60
watts of power by using all the four pairs of standard Cat.
5e/Cat. 6 Ethernet cabling. In the new 4-pair system,
two PSE controllers will be used to power both
the data pairs and the spare pairs.
  All-in-One and Compact Size Design With concepts
of "Easy to install”,
“Plug and Play” and "Simple troubleshooting" for
business and home users,
the POE-172 is an all-in-one, single-port PoE+
injector with internal power supply.
In the compact size housing, the POE-172 provides
one 100-240V AC input socket on its front panel,
two LEDs (System POWER and PoE ACTIVE) on the
top side and two RJ45 ports (PoE port and LAN
port) on the rear panel.
Simply plug in the Ethernet cables and power cord,
and the POE-172 is ready to provide high-speed
network communication and ultra power PoE injector
functions simultaneously with no need of software
configuration.
  Quick and Easy Cabling Installation for PoE
Network Deployment Backward compatible with both
802.3af and 802.3at PoE standards,
the POE-172 allows users to flexibly deploy standard
and high powered devices to transfer data and
power simultaneously through one Ethernet cable
for up to 100 meters.
The POE-172 frees the security IP camera and wireless
AP deployment from restrictions of power outlet
locations and the additional AC wiring.
It thus reduces cables and eliminates the need
for electrical outlets on the wall,
ceiling or any unreachable place, and most of all,
it reduces installation time.

Technische Details: