Planet IP40 Industrial L2+/L4 4-Port Power over Ethernet

Planet IP40 Industrial L2+/L4 4-Port Power over Ethernet

Produktbeschreibung:

4 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
with IEEE 802.3at PoE+ Injector 2 100/1000BASE-X
mini-GBIC/SFP slots for SFP type auto detection
One RJ45 console interface for basic management
and setup   Power over Ethernet: Complies with
IEEE 802.3at Power over Ethernet Plus/end-span
PSE Up to 4 IEEE 802.3af/802.3at devices powered
Supports PoE power up to 36 watts for each PoE
port Auto detects powered device (PD) Circuit
protection prevents power interference between
ports Remote power feeding up to 100m PoE management
features Total PoE power budget control Per port
PoE function enable/disable PoE admin-mode control
PoE port power feeding priority- Per PoE port
power limit PD classification detection Intelligent
PoE features Temperature threshold control PoE
usage threshold control PD alive check PoE schedule
  Industrial Protocol: Modbus TCP for real-time
monitoring in a SCADA system IEEE 1588v2 PTP (Precision
Time Protocol)   Industrial Case and Installation:
IP40 metal case DIN-rail and wall-mount designs 48~56V DC,
redundant power with polarity reverse protect
function Supports 6000V DC Ethernet ESD protection
-40 to 75 degrees C operating temperature   Layer
2 Features: High performance of Store-and-Forward architecture,
and runt/CRC filtering eliminates erroneous packets
to optimize the network bandwidth Storm Control
support Broadcast/Multicast/Unicast Supports VLAN
IEEE 802.1Q tagged VLAN Up to 255 VLANs groups,
out of 4094 VLAN Ids Provider Bridging (VLAN Q-in-Q)
support (IEEE 802.1ad) Private VLAN Edge (PVE)
Protocol-based VLAN MAC-based VLAN Voice VLAN
GVRP (GARP VLAN Registration Protocol)Supports
Spanning Tree Protocol IEEE 802.1D Spanning Tree
Protocol (STP) IEEE 802.1w Rapid Spanning Tree
Protocol (RSTP) IEEE 802.1s Multiple Spanning
Tree Protocol (MSTP),
spanning tree by VLAN BPDU Guard Supports Link
Aggregation 802.3ad Link Aggregation Control Protocol
(LACP) Cisco ether-channel (static trunk) Maximum
2 trunk groups with 2 ports per trunk group Up
to 4Gbps bandwidth (duplex mode) Provides port
mirror (many-to-1) Port mirroring to monitor the
incoming or outgoing traffic on a particular port
Loop protection to avoid broadcast loops Supports
ERPS (Ethernet Ring Protection Switching) Compatible
with Cisco Uni-directional link detection(UDLD)
that monitors a link between two switches and
blocks the ports on both ends of the link if the
link fails at any point between the two devices
Link Layer Discovery Protocol (LLDP)   Layer 3
IP Routing Features: Supports maximum 32 static
routes and route summarization   Quality of Service:
Ingress Shaper and Egress Rate Limit per port
bandwidth control 8 priority queues on all switch
ports Traffic classification IEEE 802.1p CoS IP
TOS/DSCP/IP precedence IP TCP/UDP port number
Typical network application Strict priority and
Weighted Round Robin (WRR) CoS policies Supports
QoS and In/Out bandwidth control on each port
Traffic policing on the switch port DSCP remarking
  Multicast: Supports IPv4 IGMP snooping v1,
v2 and v3 Supports IPv6 MLD snooping v1 and v2
Querier mode support IGMP snooping port filtering
MLD snooping port filtering MVR (Multicast VLAN
Registration)   Security: Authentication IEEE
802.1x Port-based/MAC-based network access authentication
Built-in RADIUS client to cooperate with the RADIUS
servers TACACS+ login users access authentication
RADIUS/TACACS+ users access authentication Access
Control List IP-based Access Control List (ACL)
MAC-based Access Control List Source MAC/IP address
binding DHCP snooping to filter distrusted DHCP
messages Dynamic ARP Inspection discards ARP packets
with invalid MAC address to IP address binding
IP Source Guard prevents IP spoofing attacks IP
address access management to prevent unauthorized
intruder   Management: IPv4 and IPv6 dual stack
management Switch Management Interfaces Console/Telnet
Command Line Interface Web switch management SNMP
v1 and v2c switch management SSH/SSL and SNMP
v3 secure access SNMP Management Four RMON groups (history,
statistics, alarms, and events) SNMP trap for
interface Link Up and Link Down notification IPv6
IP address/NTP/DNS management Built-in Trivial
File Transfer Protocol (TFTP) client BOOTP and
DHCP for IP address assignment System Maintenance
Firmware upload/download via HTTP/TFTP Reset button
for system reboot or reset to factory default
Dual Images DHCP Relay and DHCP Option 82 DHCP
Server User Privilege levels control Network Time
Protocol (NTP) SFP-DDM (Digital Diagnostic Monitor)
Network Diagnositc ICMPv6/ICMPv4 Remote Ping Cable
diagnostic technology provides the mechanism to
detect and report potential cabling issues PLANET
Smart Discovery Utility for deployment management    

Technische Details: