Planet Switch managed 8 x SFP + 2 x 10/100/1000 an DIN-Schiene montierbar

Planet Switch managed 8 x SFP + 2 x 10/100/1000 an DIN-Schiene montierbar

Produktbeschreibung:

8 100/1000Base-SX/LX mini-GBIC SFP slots 2 10/100/1000Base-T
Ethernet interface Industrial Case /
Installation IP30 Aluminum case protection DIN-Rail
and Wall Mount Design Redundant Power Design - 12 to 48V DC,
redundant power with polarity reverse protect
function - AC 24V power adapter acceptable Supports
EFT protection 6000 VDC for power line Supports
6000 VDC Ethernet ESD protection -40 to 75 Degree
C operation temperature Layer 2 Features Prevents
packet loss with back pressure (Half-Duplex) and
IEEE 802.3x PAUSE frame flow control (Full-Duplex)
High performance of Store-and-Forward architecture
and runt/CRC filtering eliminate erroneous packets
to optimize the network bandwidth Storm Control
support - Multicast /
Unknown-Unicast Supports VLAN - IEEE 802.1Q Tagged
VLAN - Up to 255 VLANs groups,
out of 4095 VLAN IDs - Provider Bridging (VLAN
Q-in-Q) support (IEEE 802.1ad) - Private VLAN
- Protocol-Based VLAN - MAC-Based VLAN - Voice
VLAN Supports Spanning Tree Protocol - STP,
IEEE 802.1D Spanning Tree Protocol - RSTP, IEEE
802.1w Rapid Spanning Tree Protocol - MSTP,
IEEE 802.1s Multiple Spanning Tree Protocol, spanning
tree by VLAN - BPDU Guard Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (Static Trunk) - Maximum
5 trunk groups,
up to 10 ports per trunk group - Up to 20Gbps
bandwidth(Duplex Mode) Provides Port Mirror (many-to-1)
Port Mirroring to monitor the incoming or outgoing
traffic on a particular port Supports E.R.P.S.
(Ethernet Ring Protection Switching, *Function
to expect in future) Quality of Service Ingress
Shaper and Egress Rate Limit per port bandwidth
control 8 priority queues on all switch ports
Traffic classification - IEEE 802.1p CoS - IP TOS /
DSCP / IP Precedence - IP TCP/UDP port number
- Typical network application Strict priority
and Weighted Round Robin (WRR) CoS policies Supports
QoS and In/Out bandwidth control on each port
Traffic-policing policies on the switch port DSCP
remarking Multicast Supports IGMP Snooping v1,
v2 and v3 Supports MLD Snooping v1 and v2 Querier
mode support IGMP Snooping port filtering MLD
Snooping port filtering MVR (Multicast VLAN Registration)
Security IEEE 802.1x Port-Based /
MAC-Based network access authentication Built-in
RADIUS client to co-operate with the RADIUS servers
TACACS+ login users access authentication RADIUS /
TACACS+ users access authentication IP-Based Access
Control List (ACL) MAC-Based Access Control List Source MAC /
IP address binding DHCP Snooping to filter un-trusted
DHCP messages Dynamic ARP Inspection discards
ARP packets with invalid MAC address to IP address
binding IP Source Guard prevents IP spoofing attacks
Loop Protection IP address access management to
prevent unauthorized intruder Management Switch
/Management Interfaces - Web switch management
- Remote Telnet management - SNMP v1,
v2c, and v3 switch management - SSH / SSL secure
access Four RMON groups (history,
statistics, alarms, and events) IPv6 IP Address /
NTP / DNS management Built-in Trivial File Transfer
Protocol (TFTP) client BOOTP and DHCP for IP address
assignment Firmware upload/download via HTTP /
TFTP DHCP Relay DHCP Option82 User Privilege levels
control NTP (Network Time Protocol) PTP (Precision
Time Protocol) Link Layer Discovery Protocol (LLDP)
Protocol Cable Diagnostic technology provides
the mechanism to detect and report potential cabling
issues Reset button for system reboot or reset
to factory default PLANET Smart Discovery Utility
for deploy management   Multiple SFP Fiber Port
Switch for Growing Long-Reach Networking of Industry
and Telecom PLANET IGS-10080MFT is an Industrial
10-Port Full Gigabit Managed Ethernet Switch specially
designed to build a full Gigabit backbone to transmit reliable,
high speed data in heavy industrial demanding
environments and also can forward data to remote
network through fiber optic.
It provides 8-Port 100/1000Base-X SFP fiber optic
interface and 2 extra 10/100/1000Base-T copper
interfaces delivered in an IP30 rugged strong
case with redundant power system,
being able to operate under the temperature range
from -40 to 75 Degree C,
the IGS-10080MFT can be placed in almost any difficult environment.
   IPv6 / IPv4 Full-Functioned Managed Switch
for Building Automation Networking The IGS-10080MFT
is the ideal solution to fulfill the demand of
IPv6 management Gigabit Ethernet Switch,
especially in the Industrial hardened environment.
It supports both IPv4 and IPv6 management functions
and can work with original network structure.
The IGS-10080MFT provides advanced Layer 2 to
Layer 4 data switching and redundancy,
Quality of Service traffic control, network access
control and authentication,
and Secure Management features to protect customer’s
industrial and automation network connectivity.
  Fast Recovery to a Redundant Ethernet Network
The IGS-10080MFT features strong and self-recovery
capability to prevent interruptions and outside intrusions.
It incorporates Rapid Spanning Protocol (RSTP),
Multiple Spanning Tree (MSTP) as well as the Loop
protection function that will shutdown specific
Ethernet interfaces when system detects a loop.
The dynamic port Link Aggregation and Redundant
Power System are provided into customers’ industrial
automation network to enhance system reliability
and uptime in the harsh factory environments.
It greatly protects customer’s industrial network
with switching recovery capability that is used
for implementing fault tolerant ring architectures.
  Flexible and Extendable Solution The 8 mini-GBIC
slots built in the IGS-10080MFT support Dual-Speed,
100Base-FX and 1000Base-SX/LX SFP (Small Form-factor
Pluggable) fiber-optic modules,
that means, the administrator now can flexibly
choose the suitable SFP transceiver according
to the transmission distance or the transmission
speed required to extend the network efficiently.

Technische Details: