Planet Switch L2+ managed 8 x 10/100/1000 PoE+ + 4 x Gigabit SFP an DIN-Schiene montierbar wandmontierbar 240 W Gleichstrom

Planet Switch L2+ managed 8 x 10/100/1000 PoE+ + 4 x Gigabit SFP an DIN-Schiene montierbar wandmontierbar 240 W Gleichstrom

Produktbeschreibung:

8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
with IEEE 802.3at PoE+ Injector 4 100/1000BASE-X
mini-GBIC/SFP slots for SFP type auto detection
One RJ45 console interface for basic management
and setup   Power over Ethernet: Complies with
IEEE 802.3at Power over Ethernet Plus/end-span
PSE Up to 8 IEEE 802.3af/802.3at devices powered
Supports PoE power up to 36 watts for each PoE
port Auto detects powered device (PD) Circuit
protection prevents power interference between
ports Remote power feeding up to 100m PoE management
features Total PoE power budget control Per port
PoE function enable/disable PoE admin-mode control
PoE port power feeding priority Per PoE port power
limit PD classification detection Intelligent
PoE features Temperature threshold control PoE
usage threshold control PD alive check PoE schedule
  Industrial Case and Installation: IP30 aluminum
case DIN rail and wall-mount design 48~56V DC,
redundant power with polarity reverse protect
function Supports 5000V DC Ethernet ESD protection
-40 to 75 degrees C operating temperature   Digital
Input and Digital Output: 2 Digital Input (DI)
2 Digital Output (DO) Integrate sensors into auto
alarm system Transfer alarm to IP network via
email and SNMP trap   Layer 2 Features: Prevents
packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame flow control (full-duplex)
High performance of Store-and-Forward architecture,
and runt/CRC filtering eliminates erroneous packets
to optimize the network bandwidth Storm Control
support Broadcast/Multicast/Unicast Supports VLAN
IEEE 802.1Q tagged VLAN Up to 255 VLANs groups,
out of 4094 VLAN Ids Provider Bridging (VLAN Q-in-Q)
support (IEEE 802.1ad) Private VLAN Edge (PVE)-
Protocol-based VLAN MAC-based VLAN Voice VLAN
Supports Spanning Tree Protocol IEEE 802.1D Spanning
Tree Protocol (STP) IEEE 802.1w Rapid Spanning
Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning
Tree Protocol (MSTP),
spanning tree by VLAN BPDU Guard Supports Link
Aggregation 802.3ad Link Aggregation Control Protocol
(LACP) Cisco ether-channel (static trunk) Maximum
6 trunk groups with 4 ports per trunk group Up
to 8Gbps bandwidth (duplex mode) Provides port
mirror (1-to-1) Port mirroring to monitor the
incoming or outgoing traffic on a particular port
Loop protection to avoid broadcast loops Supports
ERPS (Ethernet Ring Protection Switching)   Layer
3 IP Routing Features: Supports maximum 32 static
routes and route summarization   Quality of Service:
Ingress Shaper and Egress Rate Limit per port
bandwidth control 8 priority queues on all switch
ports Traffic classification IEEE 802.1p CoS-
IP TOS/DSCP/IP precedence IP TCP/UDP port number
Typical network application Strict priority and
Weighted Round Robin (WRR) CoS policies Supports
QoS and In/Out bandwidth control on each port
Traffic-policing policies on the switch port DSCP
remarking   Multicast: Supports IGMP snooping v1,
v2 and v3 Supports MLD snooping v1 and v2 Querier
mode support IGMP snooping port filtering MLD
snooping port filtering MVR (Multicast VLAN Registration)
  Security: IEEE 802.1x Port-based/MAC-based network
access authentication Built-in RADIUS client to
cooperate with the RADIUS servers TACACS+ login
users access authentication RADIUS/TACACS+ users
access authentication IP-based Access Control
List (ACL) MAC-based Access Control List Source
MAC/IP address binding DHCP snooping to filter
distrusted DHCP messages Dynamic ARP Inspection
discards ARP packets with invalid MAC address
to IP address binding IP Source Guard prevents
IP spoofing attacks IP address access management
to prevent unauthorized intruder   Management_
Switch Management Interfaces Console/Telnet Command
Line Interface Web switch management- SNMP v1
and v2c switch management SSH/SSL and SNMP v3
secure access Four RMON groups (history,
statistics, alarms, and events) IPv6 IP address/NTP/DNS
management Built-in Trivial File Transfer Protocol
(TFTP) client BOOTP and DHCP for IP address assignment
Firmware upload/download via HTTP/TFTP DHCP Relay
and DHCP Option 82 User Privilege levels control
Network Time Protocol (NTP) Link Layer Discovery
Protocol (LLDP) SFP-DDM (Digital Diagnostic Monitor)
Cable diagnostic technology provides the mechanism
to detect and report potential cabling issues
Reset button for system reboot or reset to factory
default PLANET Smart Discovery Utility for deployment management

Technische Details: