Planet Switch L3 managed 8 x 10/100/1000 PoE+ + 2 x SFP + 2 x 10 Gigabit SFP+ an DIN-Schiene montierbar wandmontierbar 240 W Gleichstrom

Planet Switch L3 managed 8 x 10/100/1000 PoE+ + 2 x SFP + 2 x 10 Gigabit SFP+ an DIN-Schiene montierbar wandmontierbar 240 W Gleichstrom

Produktbeschreibung:

Physical Port Eight 10/100/1000BASE-T Gigabit
Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
Two 100/1000BASE-X mini-GBIC/SFP slots for SFP
type auto detection Two 10 GBASE-SR/LR SFP+ slots,
backward compatible with 1000BASE-SX/LX/BX SFP
One RJ45 console interface for basic management
and setup   Power over Ethernet Complies with
IEEE 802.3at Power over Ethernet Plus/end-span
PSE Up to 8 IEEE 802.3af/802.3at devices powered
Supports PoE power up to 36 watts for each PoE
port Auto detects powered device (PD) Circuit
protection prevents power interference between
ports Remote power feeding up to 100m PoE management
features - Total PoE power budget control - Per
port PoE function enable/disable - PoE admin-mode
control - PoE port power feeding priority - Per
PoE port power limit - PD classification detection
Intelligent PoE features - Temperature threshold
control - PoE usage threshold control - PD alive
check - PoE schedule   Industrial Case & Installation
IP30 aluminum case DIN rail and wall-mount design 48~56V DC,
redundant power with polarity reverse protect
function Supports 6000V DC Ethernet ESD protection
-40 to 75 degrees C operating temperature   Digital
Input & Digital Output 2 Digital Input (DI) 2
Digital Output (DO) Integrate sensors into auto
alarm system Transfer alarm to IP network via
email and SNMP trap   Layer 2 Features Prevents
packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame flow control (full-duplex)
High performance of Store-and-Forward architecture,
and runt/CRC filtering eliminates erroneous packets
to optimize the network bandwidth Storm Control
support - Broadcast/Multicast/Unicast Supports
VLAN - IEEE 802.1Q tagged VLAN - Up to 255 VLANs groups,
out of 4094 VLAN IDs - Provider Bridging (VLAN
Q-in-Q) support (IEEE 802.1ad) - Private VLAN
Edge (PVE) - Protocol-based VLAN - MAC-based VLAN
- Voice VLAN Supports Spanning Tree Protocol -
IEEE 802.1D Spanning Tree Protocol (STP) - IEEE
802.1w Rapid Spanning Tree Protocol (RSTP) - IEEE
802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN - BPDU Guard Supports Link
Aggregation - 802.3ad Link Aggregation Control
Protocol (LACP) - Cisco ether-channel (static
trunk) - Maximum 6 trunk groups with 4 ports per
trunk group - Up to 22Gbps bandwidth (duplex mode)
Provides port mirror (1-to-1) Port mirroring to
monitor the incoming or outgoing traffic on a
particular port Loop protection to avoid broadcast
loops   Layer 3 IP Routing Features Supports maximum
32 static routes and route summarization   Quality
of Service Ingress Shaper and Egress Rate Limit
per port bandwidth control 8 priority queues on
all switch ports Traffic classification - IEEE
802.1p CoS - IP TOS/DSCP/IP precedence - IP TCP/UDP
port number - Typical network application Strict
priority and Weighted Round Robin (WRR) CoS policies
Supports QoS and In/Out bandwidth control on each
port Traffic-policing policies on the switch port
DSCP remarking   Multicast Supports IGMP snooping v1,
v2 and v3 Supports MLD snooping v1 and v2 Querier
mode support IGMP snooping port filtering MLD
snooping port filtering MVR (Multicast VLAN Registration)
  Security IEEE 802.1x Port-based/MAC-based network
access authentication Built-in RADIUS client to
cooperate with the RADIUS servers TACACS+ login
users access authentication RADIUS/TACACS+ users
access authentication IP-based Access Control
List (ACL) MAC-based Access Control List Source
MAC/IP address binding DHCP snooping to filter
distrusted DHCP messages Dynamic ARP Inspection
discards ARP packets with invalid MAC address
to IP address binding IP Source Guard prevents
IP spoofing attacks IP address access management
to prevent unauthorized intruder   Management
Switch Management Interfaces - Console/Telnet
Command Line Interface - Web switch management
- SNMP v1 and v2c switch management - SSH/SSL
and SNMP v3 secure access Four RMON groups (history,
statistics, alarms, and events) IPv6 IP address/NTP/DNS
management Built-in Trivial File Transfer Protocol
(TFTP) client BOOTP and DHCP for IP address assignment
Firmware upload/download via HTTP/TFTP DHCP Relay
DHCP Option 82 User Privilege levels control Network
Time Protocol (NTP) Link Layer Discovery Protocol
(LLDP) SFP-DDM (Digital Diagnostic Monitor) Cable
diagnostic technology provides the mechanism to
detect and report potential cabling issues Reset
button for system reboot or reset to factory default
PLANET Smart Discovery Utility for deployment
management 802.3at PoE+ & 10G Uplink DIN-rail
Solution for Harsh Industrial Environment PLANET
IGS-5225-8P2S2X is the smallest 10G uplink managed
PoE switch in the industrial networking industry.
Based on its 10Gbps big pipe connectivity to core networks,
the IGS-5225-8P2S2X, equipped with 8 Gigabit ports
featuring 36-watt 802.3at PoE+ and two 10Gbps
SFP+ uplink slots,
meets the demands of high power consumption and
high bandwidth for 11ac Gigabit Wi-Fi APs,
other PoE applications or those requiring heavy
traffic loading.
With a rugged metal case and wide temperature
range from -40 to 75 degrees C,
the IGS-5225-8P2SXIP30 is able to stably operate
in heavy Industrial demanding environments.
Thus, the IGS-5225-8P2S2X provides a high level
of immunity against electromagnetic interference
and heavy electrical surges which are usually
found on plant floors or in curbside traffic control cabinets.
The IGS-5225-8P2S2X also allows either DIN rail
or wall mounting for efficient use of cabinet space.
  Flexible and Extendable 10Gb Ethernet Solution
10G Ethernet is a big leap in the evolution of Ethernet.
Each of the 10G SFP+ slots in the IGS-5225-8P2S2X
supports dual speed and 10 GBASE-SR/LR or 1000BASE-SX/LX.
With its 2-port, 10G Ethernet link capability,
the administrator now can flexibly choose the
suitable SFP/SFP+ transceiver according to the
transmission distance or the transmission speed
required to extend the network efficiently.
The IGS-5225-8P2S2X provides broad bandwidth and
powerful processing capacity.
  High Power PoE for Security and Public Service
Applications To fulfill the demand of High Power
PoE for network applications with Gigabit speed
transmission and wide temperature range,
the IGS-5225-8P2S2X provides 8 10/100/1000Mbps
ports featuring IEEE 802.3at Power over Ethernet
Plus (PoE+) that combines up to 36-watt power
output and data per port over one Cat.5E/6 Ethernet cable.
With a total 240-watt PoE budget on the whole system,
the IGS-5225-8P2S2X is designed specifically to
satisfy the growing demand of higher power consuming
network PDs (powered devices) such as multi-channel
(802.11a/b/g/n) wireless LAN access points,
PTZ (Pan, Tilt & Zoom)/speed dome network cameras
and other PoE network devices by providing PoE power,
doubling that of the current conventional 802.3af PoE.
  Intelligent Alive Check for Powered Device The
IGS-5225-8P2S2X PoE Switch can be configured to
monitor connected PD’s status in real time via ping action.
Once the PD stops working and responding, the
IGS-5225-8P2S2X will recycle the PoE port power
and bring the PD back to work.
It also greatly enhances the reliability in that
the PoE port will reset the PD power,
thus reducing administrator’s management burden.
  PoE Schedule for Energy Saving Under the trend
of energy saving worldwide and contributing to
environmental protection on the Earth,
the IGS-5225-8P2S2X can effectively control the
power supply besides its capability of giving
high watts power.
The built-in “PoE schedule” function helps you
to enable or disable PoE power feeding for each
PoE port during specified time intervals and it
is a powerful function to help SMBs or enterprises
save power and money.
  Scheduled Power Recycling The IGS-5225-8P2S2X
allows each of the connected PoE IP cameras or
PoE wireless access points to reboot at a specific
time each week.
Therefore, it will reduce the chance of IP camera
or AP crash resulting from buffer overflow.
  SMTP/SNMP Trap Event Alert The IGS-5225-8P2S2X
provides an event alert function to help to diagnose
the abnormal device owing to whether or not there
is a break of the network connection,
or the rebooting response.   Digital Input and
Digital Output for External Alarm The IGS-5225
series supports Digital Input and Digital Output
on its front panel.
This external alarm enables users to use Digital
Input to detect and log external device status
(such as door intrusion detector),
and send event alarm to the administrators. The
Digital Output could be used to alarm the administrators
if the IGS-5225 series port shows link down,
link up or power failure.   Layer 3 IPv4 and IPv6
Software VLAN Routing for Secure and Flexible
Management To help customers stay on top of their businesses,
the IGS-5225 series not only provides ultra high
transmission performance and excellent Layer 2 technologies,
but also IPv4/IPv6 software VLAN routing feature
which allows to crossover different VLANs and
different IP addresses for the purpose of having
a highly-secure,
flexible management and simpler networking application.
  Efficient Management For efficient management,
the IGS-5225 Managed Ethernet Switch series is
equipped with console,
Web and SNMP management interfaces. With the built-in
Web-based management interface,
the IGS-5225 series offers an easy-to-use, platform-independent
management and configuration facility.
For text-based management, the IGS-5225 series
can be accessed via Telnet and the console port.
Moreover, it also offers secure remote management
via any standard-based management software by
supporting SNMPv3 connection which encrypts the
packet content at each session.
  Flexibility and Extension Solution The additional
two mini-GBIC slots built in the IGS-5225-8P2S2X
support dual speed,
100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor
Pluggable) fiber-optic modules,
meaning the administrator now can flexibly choose
the suitable SFP transceiver according to not
only the transmission distance but also the transmission
speed required.
The distance can be extended from 550m to 2km
(multi-mode fiber),
or even going up to 10/20/30/40/50/60/70/120km
(single-mode fiber or WDM fiber).
They are well suited for applications within the
enterprise data centers and distributions.
  Intelligent SFP Diagnosis Mechanism The IGS-5225
series supports SFP-DDM (Digital Diagnostic Monitor)
function that greatly helps network administrator
to easily monitor real-time parameters of the SFP,
such as optical output power, optical input power,
temperature, laser bias current, and transceiver
supply voltage.
  Modbus TCP provides Flexible Network Connectivity
for Factory Automation With the supported Modbus
TCP/IP protocol,
the IGS-5225 series can easily integrate with
SCADA systems,
HMI systems and other data acquisition systems
in factory floors.
It enables administrators to remotely monitor
the industrial Ethernet switch’s operating information,
port information and communication status, thus
easily achieving enhanced monitoring and maintenance
of the entire factory.

Technische Details: